1. What is VMKernel and Explain the importance
Ans: VMkernel is a virtualization interface between the ESXi host and a Virtual Machine
which stores VMs. It is responsible to allocate all available resources of ESXi host to
VMs such as CPU, storage, memory, etc. It also controls special services such as Fault
tolerance, NFS, vMotion, traffic management, and iSCSI. To access these services,
VMkernel port can be configured on the ESXi server using a distributed or standard
vSwitch. Hosted VMs cannot communicate with ESXi server in the absence of VMkernel
2. Explain VMware FT?
Ans: FT stands for Fault Tolerance very important and prominent component of VMware
vSphere. It provides continuous availability for Virtual Machines when an ESXi host
fails. It supports up to 64 GB memory and 4 vCPUs. Fault Tolerance is very
bandwidth-intensive and 10GB NIC is recommended to configure it. It creates a complete
copy of an entire VM such as compute, memory, and storage.
3. What is datastore?
Ans: Datastore is a storage location where VMs files are stored and accessed. Datastore
is based on a file system which is called NFS, VMFS.
4. What is Fault Tolerant Logging?
Ans: The communication between two ESXi hosts is called Fault Tolerant T logging when FT
is configured between them. The pre-requisite for configuring Fault Tolerant is to
configure the VMKernel port
5. What is the .vmx file?
Ans: It is the configuration file of a Virtual Machine
6. What information .nvram file stores?
Ans: It stores BIOS related information of a Virtual Machine.
7.What .vmdk file does and used?
Ans: Vmdk is a Virtual Machine disk file and stores data of a VM. It can be up to 62 TB
in size in the vSphere 6.0 version.
8. What is virtual networking?
Ans: A network of Virtual Machines running on a physical server that are connected
logically with each other is called virtual networking.
9. Explain vSS?
Ans: vSS stands for Virtual Standard Switch and It is responsible for communication of
VMs hosted on a single physical host. it works like a physical switch automatically
detects a VM which wants to communicate with other VM on the same physical server.
10. Explain vDS?
Ans: vDS stands for Virtual Distributed Switch and It acts as a single switch in the
whole virtual environment and is also responsible to provide administration, central
provisioning, and monitoring of the virtual network.
11. Explain hypervisor and its types?
Ans: Hypervisor is a virtualization layer that enables multiple operating systems to
share a single hardware host. Each VM or operating system is allocated physical
resources such as CPU, memory, storage, etc by the host.
Below are the two types of hypervisors
Hosted hypervisor (works as VMware Workstation(application))
Bare-metal (is virtualization VMvisor (software), Hyper-V which is installed directly
onto the hardware and controls all physical resources).
12. which is the basic security step to secure vCenter Server and users?
Ans: Authenticate vCenter Server with Active Directory. By using this we can efficiently
manage the virtual environment and can also assign specific roles to users.
13. What is Virtualization?< /i>
Ans: The process of creating virtual versions of physical components such as Storage
Devices and Servers, Network Devices on a physical host is called virtualization.
Virtualization lets you run multiple virtual machines on a single physical machine which
is also called ESXi host.
14. What are the different types of virtualization?
Ans: Below are the 5 basic types of virtualization
Application Virtualization: increased mobility of applications and allows
migration of Virtual Machines from the host on another with minimal downtime.
Desktop Virtualization: virtualize desktop to increase service and reduce cost
Server virtualization: consolidates the multiple OS and physical server can be run
on a single server.
Network Virtualization: Provides complete reproduction of a physical network into
a software-defined network.
Storage Virtualization: Provides an abstraction layer for physical storage
resources to optimize and manage in virtual deployment.
15. How many vCPUs can be used for a Virtual Machine in FT?
Ans: In vSphere 6.0, there can be up to 4 vCPUs and 64 GB RAM can be used.
16. Which is the new technology used by VMware
Ans: vLockstep technology is used by VMware Fault Tolerance
17. what happens to FT if vCenter Server goes down?
Ans: vCenter server is only required to enable Fault Tolerance on a Virtual Machine. Once
it is configured, vCenter is not required to be online for FT to continue to work. Fault
Tolerance failover between primary and secondary will occur even if the vCenter is down.
18. What is the difference between VMware FT and HA?
Ans: The main difference between VMware FT and HA is: FT is enabled per VM and HA is
enabled per cluster and VMware. In FT, there is no downtime, because the second copy
will be activated in case of any host failure. while in HA, VMs will be re-started and
powered-on on another host in case of a host failure,
19. How many maximum standard ports per host available?
Ans: 4096 ports per host are available either in the distributed switch or standard
20. What are the main benefits of a distributed switch (vDS)?
Ans: vDS can provide:
21. What is the VMKernal adapter and explain its uses?
Ans: VMKernel adapter provides network connectivity to the ESXi host to handle network
traffic for IP Storage, NAS, Fault Tolerance, vMotion, and vSAN. For each type of
traffic such as vSAN, vMotion, etc. separate VMKernal adapter should be created and
22. Explain the use of port groups in data center virtualization?
TAns: It is used to segregate network traffic such as vMotion, FT, management traffic,
23. Explain the port groups are configured in ESXi networking?
Virtual Machine Port Group – Used for VM Network
Service Console Port Group – Used for Service Console Communications
VMKernel Port Group – Used for iSCSI, VMotion, NFS Communications
24. Explain VLAN and its uses in virtual networking?
Ans: A logical configuration on the switch port to segment the IP Traffic where each
segment cannot communicate with other segments without proper rules mentioned is called
VLAN and every VLAN has a defined number called VLAN ID.
25. Explain VLAN Tagging?
Ans: The process of inserting VLAN ID into a packet header to identify which VLAN packet
belongs to is called VLAN tagging.
26. Explain promiscuous mode on vSwitch?
Ans: The default mode is Reject. If Accept mode is selected, VM will receive all traffic
port groups via vSwitch.
27. What is MAC address changes network policy?
Ans: The default mode of this network policy is Reject. If the Accept is selected, the
host will accept the requests to change the MAC address effectively
28. Explain vRealize Operation (vROP)
Ans: vROP provides the operation dashboards for capacity optimization, performance
analytics, and monitoring of the virtual environment.
29. Which is the VM Hardware version for vSphere 6.0?
Ans: Version 11
30. Which is the VM hardware version for vSphere 6.5?
Ans: Version 13
31. Platform Services Controller ( PSC ) was introduced in which version of
Ans: PSC was introduced in vSphere 6.0. vSphere 6.0 is also called as Virtual hardware
32. Explain Forged transmits network policy?
Ans: The default mode is Reject. If Accept is selected, the host will not compare the
source and effective MAC address transmitted from a Virtual Machine
33. What are the important components of vCenter Server architecture?
Ans: Below is the three main components of vCenter Server architecture.
34. What is PSC and explain its components?
Ans: PSC stands for Platform Services Controller and it is first introduced in version 6
of VMware vSphere which handles infrastructure security functions. The three main
35. What are the main deploying methods of PSC
Ans: We can install PSC in two ways. They are
Embedded, and Centralized
36. What are the three network security policies/modes on vSwitch?
37. What are the two different types of vCenter Server deployment?
Ans: The two deployment types are mentioned as below:
38. How many hosts can manage avCenter Server in vSphere 6.0?
Ans: In vSphere 6.0, a single vCenter Server can manage up to 1000 hosts either invCenter
or Windows Appliance
39. How many hosts can be managed by a cluster in vSphere 6.0?
Ans: A single cluster can manage up to 64 hosts (Maximum)
40. What are the disk types are in VMware?
Ans: There are three disk types in vSphere. They are:
Thick Provisioned Lazy Zeroes: every virtual disk is created by default in this
disk format. Physical space is allocated to a Virtual Machine when a virtual disk is
created. It can’t be converted to a thin disk.
Thick Provision Eager Zeroes: this disk type is used in VMware FT. All required
disk space is allocated to a Virtual Machine at the time of creation. It takes more time
to create a virtual disk compare to any other disk formats.
hin provision: It provides on-demand allocation of disk space to a Virtual
Machine. When data size grows, the size of the disk will grow with that. Storage
capacity utilization can be up to 100% with thin provisioning.
The key to acing any job interview is to make sure that all your answers are
tailored to be in line with the company values, its goals and the specifics
pertaining to the job you are applying for.
AWS Training in Bangalore
© 2020 Apponix, All Rights Reserved.